Serving Stuart, Palm City, Jensen Beach, Port Salerno & Hobe Sound Mon–Sun, 8am–8pm Free estimate in 24 hours → Free estimates within 24 hours Get one →
Stuart pricing

How Much Does Pressure Cleaning Cost in Stuart, FL?

Most Stuart homeowners pay $150 to $800, depending on the surface. A house wash runs $250–$650, a roof $350–$800, a driveway $150–$450, and paver sealing is priced per square foot at $1.75–$3.25. Every figure below is a Stuart number, not a national average.

Prices reviewed October 2026 Stuart & Martin County
Get your exact price

Tell us the address and what needs cleaning. Free, no obligation, and the number we give you is the number you pay.

Prefer to talk? Call (772) 268-9583

Licensed & insured
Coverage details on request
Soft wash, not blasting
Safe for roofs, stucco & screens
Exact quote before we start
Agreed in writing once we’ve seen the job
Final walk-through
We don’t leave until you’re happy
Typical Stuart job
$150–$800

Across every service, that is what most Stuart properties come to. The spread is real: a single driveway sits at the bottom, a large two-story home with a tile roof at the top. Exact price confirmed on site, free.

House wash$250–$650
Roof cleaning$350–$800
Driveway$150–$450
Paver seal$1.75–$3.25/sq ft

What pressure cleaning costs in Stuart

These are the ranges we actually quote in Stuart, Palm City, Jensen Beach, Port Salerno and Hobe Sound, not a national average adjusted for Florida. There is no travel charge anywhere in Martin County, so a Palm City address and a downtown Stuart address get the same number for the same job.

Pressure cleaning estimated price ranges by service in Stuart, FL
ServiceTypical Stuart rangeWhat drives the price
House soft washing$250–$650Square footage, one or two stories
Roof cleaning$350–$800Roof size, pitch, tile or shingle
Driveway cleaning$150–$450Square footage, rust and oil staining
Paver cleaning & sealing$1.75–$3.25 / sq ftWhether re-sanding and stripping are needed
Pool deck & lanai$175–$400Deck size, screens in or out
Commercial$150–$800 +Size, frequency, working hours

Prices by service

House soft washing, $250–$650

House washing estimated price ranges by home size in Stuart, FL
Home sizeOne storyTwo story
Up to 1,500 sq ft$250–$325$325–$400
1,500–2,500 sq ft$325–$425$425–$525
2,500 sq ft +$425–$525$525–$650

Roof cleaning, $350–$800

Roof cleaning estimated price ranges in Stuart, FL
Roof sizeOne storyTwo story
Up to 1,500 sq ft$350–$450$450–$525
1,500–2,500 sq ft$425–$525$525–$600
2,500 sq ft +$525–$650$650–$800

Driveway cleaning, $150–$450

Driveway cleaning estimated price ranges in Stuart, FL
Driveway sizeStandard cleanWith rust / oil treatment
1–2 car (up to 600 sq ft)$150–$225$225–$290
2–3 car (600–900 sq ft)$200–$280$280–$360
3 car + or long drive$270–$350$350–$450

Paver cleaning & sealing, $1.75–$3.25 / sq ft

Paver cleaning and sealing estimated price ranges in Stuart, FL
JobClean & sealClean, re-sand & seal
Paver driveway$1.75–$2.40 / sq ft$2.20–$2.90 / sq ft
Pool deck or patio$1.90–$2.60 / sq ft$2.40–$3.25 / sq ft
Stripping failed sealeradd $0.50–$1.00 / sq ftadd $0.50–$1.00 / sq ft

Pool deck & lanai, $175–$400

Pool deck and lanai cleaning estimated price ranges in Stuart, FL
AreaDeck onlyDeck & screen enclosure
Small (up to 400 sq ft)$175–$225$225–$290
Medium (400–800 sq ft)$215–$285$285–$345
Large (800 sq ft +)$280–$350$350–$400

Commercial, from $150 per visit

Commercial pressure cleaning estimated price ranges in Stuart, FL
Job typeOne-timeRecurring (per visit)
Storefront & entry$200–$450$150–$300
Sidewalk / walkway run$300–$800$200–$550
HOA common areaQuoted per propertyQuoted per property

What moves the price on a Stuart property

Two homes of the same square footage can come in $150 apart. These are the things that actually account for it here.

One story or two

Expect $75–$125 more for the same square footage on two levels. That is ladder and reach time, not extra product.

How long since the last clean

Three or four years of growth needs a stronger mix, longer dwell time and sometimes a second pass. A house on a regular cycle is quicker and cheaper every time.

Shade, water and salt

North walls under mature oaks in Palm City, and anything within a few streets of the Indian River Lagoon in Jensen Beach, hold moisture longer and come back dirtier.

Barrel tile versus shingle

Tile is common in the Martin Downs and Jensen Beach golf communities. It is heavier work, more fragile and takes longer to rinse than shingle.

Rust, oil and failed sealer

Sprinkler rust on concrete and a peeling old sealer on pavers are separate treatments, not part of a standard wash. Both are priced on the table above.

Access and screens

Gated communities, narrow side yards, screen cages and anything that has to be moved or covered add time. Pool enclosures in particular are slow, careful work.

Add-ons, priced separately

None of these are bundled into a base price and then hidden. If you need one, it is a line on the quote.

Rust or irrigation-stain treatment$75–$160
Oil stain treatment, per spot$30–$70
Screen enclosure, added to a deck clean$50–$110
Gutter face brightening$1.00–$1.75 / ft
Paver joint re-sanding$0.45–$0.65 / sq ft
Stripping a failed sealer$0.50–$1.00 / sq ft

Cost per square foot

Useful for comparing one quote against another, less useful for predicting your own bill. Only paver work is genuinely priced by the foot; everything else is a flat figure for the job, because setup, water hook-up and protecting the landscaping cost the same whether the house is 1,400 or 1,900 square feet.

Pressure cleaning cost per square foot in Stuart, FL
SurfacePer square footQuoted as
House exterior (wall area)$0.15–$0.25Flat price per job
Flat concrete: drives, walks, patios$0.12–$0.25Flat price per job
Roof (soft wash)$0.20–$0.35Flat price per job
Pavers, clean and seal$1.75–$3.25Genuinely per square foot

Why three Stuart quotes come back $200 apart

This is the part no national pricing guide can tell you, and it is usually the reason a cheap quote turns out not to be cheap. When the numbers disagree that much, one of these is almost always behind it.

Soft washing versus pressure washing

A pressure-only wash is faster and cheaper and lasts a few months, because the growth is knocked off rather than killed. It also chips paint and drives water behind stucco. Ask which method is being quoted, it is the single biggest difference between two numbers.

What the sealer actually is

On pavers, a one-coat water-based sealer and a two-coat solvent-based one are different products with different lifespans, and the price gap is large. A quote that just says “seal” is not comparable to one that names the product and the number of coats.

Whether the extras are in or out

Re-sanding joints, treating rust, doing the screen cage as well as the deck, all of it can be quietly left out of the headline figure and added on the day. Check the quote names them.

Insurance, and who is on the ladder

Ask for a certificate of insurance before anyone goes on your roof. It is a reasonable question, it takes one email to answer, and it explains part of why the cheapest quote is cheapest.

These prices are estimates

Every range on this page is a real Stuart bracket, reviewed against what the work actually takes here, not a teaser number. The exact figure comes after someone has looked at the property, it is free, and once given it does not move.

Stuart pricing FAQs

Most Stuart house washes run $250 to $650. A one-story home up to 1,500 sq ft is usually $250–$325, and a larger two-story home runs $525–$650. Square footage and height matter most, followed by how long it has been since the last clean.
Houses, roofs, driveways and pool decks are quoted as a flat price for the job. Paver cleaning and sealing is the exception, that is genuinely priced per square foot, $1.75 to $3.25 depending on whether re-sanding is included. Flat pricing is simpler and means the number cannot drift upward once we start.
A roof takes longer, needs more product and carries more risk. Barrel tile and shingle both have to be soft washed rather than pressure washed, so the growth is killed chemically and rinsed gently, and the crew is working at height with gutters and landscaping below needing protection.
Yes, roughly $75 to $125 more than the same square footage on one level. The extra is ladder and reach time rather than extra product, the second story simply takes longer to cover safely.
The estimate is free and the figure given on site is the figure you pay. The ranges on this page are honest brackets rather than teaser pricing, so the on-site number normally lands inside them. If something is worse than it looked from the street we say so before starting, and you decide.
Usually, yes. The setup, the water hook-up and the drive are the same whether we clean one surface or three, so a house wash with the roof or the driveway on the same visit costs less than two separate trips. Ask when you call and we will price it both ways.
No. There is no travel charge anywhere in Martin County, so the ranges on this page apply in Stuart, Palm City, Jensen Beach, Port Salerno and Hobe Sound alike.
Service area

Same prices across Martin County

The ranges on this page apply everywhere we work, there is no travel surcharge for Palm City, Jensen Beach, Port Salerno or Hobe Sound. Don’t see your town? Call and ask.

Stuart Palm City Jensen Beach Port Salerno Hobe Sound Sewall’s Point Rio Indiantown
Map of the Stuart and Martin County service area, showing Palm City, Jensen Beach, Rio, Sewall's Point, Port Salerno and Hobe Sound

Ready for a cleaner home?

Free estimates, no obligation. We confirm your exact price once we see the job.